Video`s

Video's

For best streaming replay, right click on video link, select- save target as- then download file to your hard drive. If you have a high speed connection, going for the bigger file option will give you a much better quality video.

FLYING

JART

Jart at Clench Common First attempt with video. NE 15-20mph.

Jart partII 6.2mb. 25-30mph

Jart partII (high res) 48 mb.

BACKDRAFT

Backdraft with 24ozs ballast 12.1mb. First successful headcam flight, plane does go out of shot a few times, but overall came out quite well.

NITRO

Nitro 1 17.7mb. Flying on a 300ft hill in around 20mph winds with 4 slugs ballast on board / 52ozs auw / 19.5ozs sqft loading.

Rob's Nitro-star 8.64mb Shooting star wing and v-tail on a Nitro fuse

FLITTER

Flitter 1 7.13mb. Nice clouds and a couple of dlg launches

OTHER STUFF

Rob Holgate maidens new Acacia II 12.8mb. Check out the big grin at the end, I think he likes it.

WORKSHOP VIDEO'S

WET SEAM LAYUP

What is a wet seam layup? 7.83mb mpeg-4 file which hopefully gives you a rough idea of what I am trying to accomplish.

Preparation 22.8mb mpeg-4 file explaining how I prepare my templates to cut fabric that fits the mold, making the mold process much simpler and quicker.

Lets make something 53.4mb mpeg-4 file bit of a whopper to download, almost real time lay up of a Negus nose cone.

Birth 42.4mb mpeg-4 file showing first part removal from Negus nose cone mold. (Not as straight forward as I'd hoped, so details included on getting obstinate parts from molds.

NOSE BOAT MOLD

Nose boat mold part 1 mpeg4 15.3mb video download file covering the making of a temporary inner nose boat mold, and preparing it for laying up an inner nose boat plug.

Nose boat mold part 2 mpeg4 32.2mb video download file covering the lay up of the inner nose boat plug.