Celestra

132" wingspan thermal soarer that flies great off the slope in light breezes, its size makes for good visibility at height if you fancy some cross country soaring. Goes very well off a bungee also. Has 3 standard hi-tec servos fitted and a flight switch, covering has peeled off the canopy a little, few small bubbles on the stab which need ironing down and a piece of tape on one wing outer panel is covering a small tear in the covering. Servos control elevator, rudder and air brakes, wing is two piece with a carbon joiner. £90.00 Collection only

Call 01672 562994 or e-mail me mark.cornish@yahoo.co.uk

Jart v tailed carbon fuselage

This is a one off fuselage that is adapted from my jart moulds. Tail has been converted to a v with the aim of making it a pitcheron, thats where tail is fixed and the pitch and roll come from the wing twisting. Have used 2 layers of 160gm carbon along full length of fuselage with an additional layer in the nose area. Seams are taped with glass which has not stuck well, the tape would be easily removed and after a good sand and re-doing with some carbon strips would make a baisis for a great and unique plane. Selling as project lost momentum.........3 years ago £55.00

Call 01672 562994 or e-mail me mark.cornish@yahoo.co.uk

3dx 450 Heli

Not sure why I bought this, must have been all the bling, but after flying a heli on the flight sim for a while have realized its not my cup of tea. It has been untouched since purchasing it second hand and comes with lots of spare bits, nice looking bit of kit and ideal for someone looking for a performance 450. £240.00 with shultz reciever and base loaded antenna or £220.00 without.

Call 01672 562994 or e-mail me mark.cornish@yahoo.co.uk